The Detail Guardz Hose Guides are a simple, yet a genius product. Simply wedge one of these under each tyre and they allow your hose pipe or power cable easily trail around your car without getting snagged under the tyre.
Each hose guide features a wedge design and a roller, which stops it snagging and allows free movement.
Packaged in fours and available in various colours.
Snow Foam
Regular price £12.95Detailers Pride Snow Foam is a highly concentrated, pH neutral snow foam which delivers a thick blanket of deep cleaning foam which penetrates through and lifts dirt and grime away from the surface of the paintwork, allowing for it to be rinsed away.
Using our Snow Foam minimises the risk of inflicting swirl marks and scratches in your paintwork by removing as much dirt and grime prior to washing the vehicle. Thanks to it's pH neutral formula it's completely safe to use on vehicles which have wax, sealant or coatings on and will not degrade them in any way.
Using a Snow Foam Lance, dilute 100ml of our Snow Foam with 900ml of water and shake the bottle gently to ensure the solution is mixed properly. Spray the Snow Foam on to the vehicle and allow to dwell for several minutes. Once the foam has had time to dwell on the surface rinse it and proceed to wash the vehicle.
Sizes Available: 1L & 5L (select size above)
Microfibre Wash Mitt
Regular price £11.95The Detailers Pride Microfibre Wash Mitt is a super soft wash mitt with gentle microfibre strands that lift dirt and grime from the surface of the paint in to the deeper strands of the wash mitt. This makes for a safe wash routine as the dirt and grime is away from the surface, minimising the risk of inflicting swirl marks and scratches.
The Detailers Pride Microfibre Wash Mitt features a dense core which hold lots of shampoo allowing the mitt to glide across the surface.
Icon Iron Fallout Remover
Regular price £12.95Detailers Pride Icon is a pH balanced Iron Contamination Remover. Icon works by reacting with iron fallout which can be on your vehicle and allowing for them to be rinsed away. Its colour change formula will bleed purple upon contact with contamination showing you when it is working. Finally, unlike many others, Icon smells borderline, quite nice!
Iron contamination or fallout can be from a number of sources, heavy industrial areas, railway lines and most commonly your vehicle's brakes. Tiny pieces of iron filings can come from these sources and embed into your wheels, paintwork and other areas.
As part of the decontamination process, it's important to remove iron fallout. Iron filings embedded in your vehicles paintwork or wheels not only will leave a rough finish but also could lead to premature rusting or damage to paintwork.
Icon works by reacting with iron contamination and loosening the contamination allowing for it to be rinsed away. It features a colour change formula so you can see when the product is ready to be rinsed away.
Icon can be used as a wheel cleaner however can work out to be an expensive way of keeping your wheels clean. We strongly recommend the use of a traditional wheel cleaner for regular use and then use Icon periodically for a deeper clean.
Icon will react with the brake dust and bleed, allowing for most of the dirt to be rinsed away with a jet wash.
When used like this, the fallout remover is usually busy attacking the brake dust that stubborn contaminants can be left behind. This is why a wheel cleaner would be better to use first and then use Icon after to attack the stubborn iron deposits like in the photo below.
Before use, it's important to note do not use on hot surfaces and do not allow to dry on the surface.
Bodywork decontamination - Ensure the vehicle is clean and washed before application. Spray Icon on all areas of the vehicle and allow to work. When contact is made with iron deposits it will bleed purple. To finish the process simply rinse away.
Wheels (dirty) - Ensure wheels are cool, spray on to the wheels and allow to bleed. If wheels are really dirty, agitation with brushes may be necessary. Finally, rinse clean.
Wheels (cleaned) - Clean the wheels first with a traditional wheel cleaner to remove light brake dust. Rinse wheel cleaner from the surface and proceed to spray Icon on to the wheels. Allow to bleed purple and then rinse.
Size: 1L & 5L
